Triad Magnetics
Triad Magnetics
460 Harley Knox Blvd
Perris, CA 92571
Tel: 951.277.0757
Fax: 951.277.2757
Email: info@triadmagnetics.com
Website: www.triadmagnetics.com
Print Back
Triad chassis mount World Series transformers are designed to meet U.S. and International standards including CSA, IEC, TUV and UL requirements. The transformers consist of a dual bobbin design positioned inside an insulating shroud and constructed with UL approved high temperature material. This design eliminates the need for electrostatic shielding since there is minimal capacitance between coils when using a dual bobbin configuration. The primary and secondary are both electrically isolated from each other, and from the core itself. Chassis mount World Series transformers are available in sizes ranging from 25 VA to 175 VA, and are equipped with convenient "quick connect" terminations.
Unit of Measure

Check Stock

Click here to check stock >>

 N/A

Specifications

Electrical Rating

 N/A 25 V·A

Secondary Series

 N/A 36.0 V CT at 0.7 A

Secondary Parallel

 N/A 18.0 V at 1.4 A

Transformer Contact Type

 N/A Center Tap

Height (H)

 N/A 2 5/16 in

Width (W)

 N/A 2 13/16 in

Depth (D)

 N/A 1 15/16 in

Dimension (A)

 N/A 2 in

Dimension (B)

 N/A 1 1/8 in

Dimension (C)

 N/A 5/16 in

Dimension (T)

 N/A 3/16 in

Mounting Width

 N/A 2 3/8 in

Mounting Hole Size

 N/A 3/16 in

Primary Voltage

 N/A 115 V230 V

Primary Frequency

 N/A 50 Hz60 Hz

Weight

 N/A 1.30 lb

Technical Notes

N/A

  1. Hi-pot tested at 4,000 VRMS.
  2. Both primary and secondary coils may be connected as either series or parallel, but both must be used simultaneously.

Note

N/A Class 2/3 UL File: E65390

SnapMagic

N/A