Triad's HS-50 Output Audio Transformer provides the durability and precision required in today's demanding designs. Mu-Metal case construction for magnetic field immunity and up to 95 dB Hum reduction. Ample step-down turns ratio to accommodate source to load impedance matching. Wide range power handling capacity to deliver full power without distortion within ± 3dB. Applications include signal pre-amplification, inter-stage isolation, signal level step up/down, and impedance matching. Dependable hermetically sealed construction with low temperature rise and high heat conductivity.
Unit of Measure
Specifications
Applications |
N/A Plate to Universal Line. |
Primary Impedance |
N/A 15000 Ohm |
Secondary Impedance |
N/A 62.5 Ohm150 Ohm250 Ohm600 Ohm |
Overall Turn Ratio |
N/A 5:1 |
Note for Secondary Impedance |
N/A Balanced Center Tap. (600 and 250 Ohm) |
Frequency Response Range |
N/A 20 to 20000 Hz |
Maximum Input Level |
N/A 26 dBM |
Shielding |
N/A P-3 - Two nickel alloy shields interleaved with one heavy copper shading ring 70 db. reduction in pickup. |
Case |
N/A GP-4 |
Additional Information
Additional Information |
N/A
Avoid redesign - Use Triad HS and HSM transformers in military prototypes Triad HS and HSM series transformers are designed to meet MIL-T-27 requirements. Most of these transformers use standard MIL-T-27 case sizes. Exceptions are GP cases or any cases showing a Bw dimension, which may be classified as MIL-T-27 'YY' cases. Equipment using these transformers need not be redesigned to submit for military approval. The basically good design factors which are necessary to meet MIL-T-27 standards for performance ensure longest life in any class of service. These transformers are permanently marked with electrical and test data as specified in MIL-T-27. All are "Climatite" treated, use sturdy TRIAD terminals and are beautifully finished in gray enamel. |
