Triad Magnetics
Triad Magnetics
460 Harley Knox Blvd
Perris, CA 92571
Tel: 951.277.0757
Fax: 951.277.2757
Email: info@triadmagnetics.com
Website: www.triadmagnetics.com
Print Back
Triad prepackaged wall plug-in power supplies decrease product design time. These plug-in power sources eliminate the need for internal power supply cooling devices, thereby reducing the noise level, size and weight of the end product. In addition, these compact power sources keep heat away from sensitive circuits, and supply a safer lower output to the end product. Wall plug-in sources are completely enclosed to prevent tampering. They are offered in a wide range of popular voltages, power levels and reversed polarity (-R). The output voltage is regulated; which means the output voltage will not vary much with load. Models are available with generous six foot cord lengths. Available in 50-60 Hz operating frequency. Level IV and V efficiency. Meets EIAS 2007 energy efficiency requirements for external power supplies.
Wall Plug-Ins - Switch Mode Power Supplies
Wall Plug-Ins - Switch Mode Power Supplies - 2
Unit of Measure
Items Wall Plug-Ins - Switch Mode Power Supplies
WSU045-1500
Wall Plug-Ins - Switch Mode Power Supplies 		Wall Plug-Ins - Switch Mode Power Supplies
WSU045-2000
Wall Plug-Ins - Switch Mode Power Supplies 		Wall Plug-Ins - Switch Mode Power Supplies
WSU045-3000
Wall Plug-Ins - Switch Mode Power Supplies 		Wall Plug-Ins - Switch Mode Power Supplies
WSU050-1500
Wall Plug-Ins - Switch Mode Power Supplies 		Wall Plug-Ins - Switch Mode Power Supplies
WSU050-2000
Wall Plug-Ins - Switch Mode Power Supplies
Description N/A Triad prepackaged wall plug-in power supplies decrease product design time. These plug-in power sources eliminate the need for internal power supply cooling devices, thereby reducing the noise level, size and weight of the end product. In addition, these compact power sources keep heat away from sensitive circuits, and supply a safer lower output to the end product. Wall plug-in sources are completely enclosed to prevent tampering. They are offered in a wide range of popular voltages, power levels and reversed polarity (-R). They output voltage is regulated; which means the output voltage will not vary much with load. Models are available with generous six foot cord lengths. Available in 50-60 Hz operating frequency. Level IV and V efficiency. Meets EIAS 2007 energy efficiency requirements for external power supplies
Click here to check stock >> N/A N/A N/A N/A N/A
Polarity Center N/A Positive
Input Voltage (AC) N/A 100 to 240 V
Output Voltage (DC) N/A 4.5 V N/A 4.5 V N/A 4.5 V N/A 5.0 V N/A 5.0 V
Output Current (DC) N/A 1.50 A N/A 2.0 A N/A 3.00 A N/A 1.50 A N/A 2.0 A
Type N/A Switchmode
Height (H) N/A 2.67 in67.70 mm
Width (W) N/A 1.81 in45.90 mm
Depth (D) N/A 1.37 in34.80 mm
Maximum Power N/A 6.75 W N/A 9.00 W N/A 13.50 W N/A 7.50 W N/A 10.00 W
Input Operating Frequency N/A 50 Hz60 Hz
Output Current N/A 1.50 A N/A 2.00 A N/A 3.00 A N/A 1.50 A N/A 2.00 A
2007 EISA Efficiency N/A VI
Length (L) N/A 0.433±0.020 in11 mm
Inside Diameter (ID) N/A 0.083±0.004 in2.1 mm
Outside Diameter (OD) N/A 0.217±0.004 in5.5 mm
Alternating Current (AC) Input Voltage Range N/A
Input Current at 115 VAC (Root Mean Square (RMS)) N/A
Maximum Peak Inrush Current at 115 VAC (Cold Start) N/A
Load Regulation N/A
Line Regulation N/A
Maximum Ripple and Noise (pk-pk) N/A
No-Load Power (Stand By) N/A
Average Efficiency N/A
Note for Average Efficiency N/A
Operating Temperature Range N/A
Storage Temperature N/A
Non-Condensing Humidity N/A
Leakage Current at 264 VAC N/A
Maximum Dielectric Strength (Hi-Pot) N/A
Direct Current (DC) Dielectric Strength (Hi-pot) Per 3 Second (sec) Time N/A
Warranty N/A
Case Type N/A
Long Nominal Output Cord Length N/A
Safety and EMI N/A
EISA 2007/CEC Compliance N/A
RoHS Compliance N/A