- 100-240V input w/interchangeable input plugs
- 24W 5-24VDC Output
- Level VI Efficiency
Unit of Measure
Specifications
|
Electrical Specifications at 25 Degree Celsius (ºC) Temperature
|
Case Dimensions
|
Environmental Specifications
|
Reliability Specifications
|
Mechanical Parameters
|
Safety and EMI
|
EISA 2007/CEC Compliance
|
RoHS Compliance
Electrical Specifications at 25 Degree Celsius (ºC) Temperature
Input Voltage (AC) |
N/A 100 to 240 V |
Output Voltage (DC) |
N/A 5.0 V |
Output Current (DC) |
N/A 2.0 A |
Input Operating Frequency |
N/A 50 to 60 Hz |
Alternating Current (AC) Input Voltage Range |
N/A 90 to 264 V |
Input Current at 115 VAC (Root Mean Square (RMS)) |
N/A < 0.4 A |
Maximum Inrush Current at 115 VAC (Cold Start) |
N/A < 60 A |
Line Regulation |
N/A ±5 % |
Load Regulation |
N/A ±5 % |
Maximum Ripple and Noise (pk-pk) |
N/A 150 mV |
Typical No-Load Power (Stand By) |
N/A < 100 mW |
Typical Efficiency at 10 Percent (%) Load |
N/A 82.68 % |
Average Efficiency |
N/A 78.7 % |
Note for Average Efficiency |
N/A Typical Meets minimum level VI efficiency |
Case Dimensions
Height (H) |
N/A 3.02 in76.80 mm |
Width (W) |
N/A 1.87 in47.50 mm |
Depth (D) |
N/A 1.38 in35.00 mm |
Environmental Specifications
Operating Temperature at Full Load |
N/A 0 to +45 ºC |
Storage Temperature |
N/A -20 to 60 ºC |
Non-Condensing Relative Operating Humidity |
N/A 5 to 95 % |
Reliability Specifications
Leakage Current at 264 VAC |
N/A < 0.25 mA |
Dielectric Strength |
N/A Hi-Pot - 4242 VDC/3 secs |
Maximum Dielectric Strength (Hi-Pot) |
N/A 5 mA |
Warranty |
N/A 5 years |
Mechanical Parameters
Case Type |
N/A Thermoplastic Molded Enclosure |
Long Nominal Output Cord Length |
N/A 6 ft20 AWG |
Safety and EMI
Safety and EMI |
N/A
ETL: UL/ANSI 60950 Class II, Double Insulated BS: 1363-1:1995 + A1:1997 + A2:2003 + A3:2007 AS/NZS: AS/NZS 60950.1:2011 + A1, AS/NZS 60065:2012 GS (S50311479): EN 60950-1: 2006 + A11+A1+A12+A2 EMI standard: FCC part 15 class B, EN 61204-3:2000 Over voltage and short circuit protected |