Triad’s prepackaged linear wall plug-in power supplies are designed for Commercial and Industrial applications. These plug-in power sources eliminate the need for internal power supply cooling devices, thereby reducing the noise level, size and weight of the end product. In addition, these compact power sources keep heat away from sensitive circuits, and supply a safer lower output to the end product. Wall plug-in power sources are completely enclosed to prevent tampering. And since they carry many required agency listings, their use aids in gaining agency approvals. Offered in a wide range of popular voltages, the plug-in power sources are available in AC/AC unregulated models with generous six foot cord lengths. Available in 60 Hz only.
Unit of Measure


Input Voltage (AC)

N/A 120 V

Input Power

N/A 38.0 W

Output Voltage (AC)

N/A 12 V

Output Current (AC)

N/A 2.5 A


N/A AC/DC Unregulated

Height (H)

N/A 85 mm

Width (W)

N/A 68 mm

Depth (D)

N/A 55 mm

Output Plug Dimensions

Length (L)

N/A 11 mm

Inside Diameter (ID)

N/A 2.1 mm

Outside Diameter (OD)

N/A 5.5 mm

Technical Notes

Technical Notes

  1. Inside (tip) - positive (+), outside - negative (-)
  2. Plug use on DC and AC models



N/A Specifications subject to change without notice.

U. S. DOE Compliance per Sec . 301 of EISA 2007
As of July 1, 2008, this product is intended for use as follows: Requires Federal Food and Drug Administration listing and approval as a medical device in accordance with section 513 of the Federal Food, Drug, and Cosmetic Act (21 U.S.C. 360c). Powers the charger of a detachable battery pack or charges the battery of a product that is fully or primarily motor operated. As a service part or a spare part for an end-use product manufactured before July 1, 2008, that constitutes the primary load of this power supply.
Catalog Index     Privacy     Sitemap© 2017 Triad Magnetics, All Rights Reserved   |   Site created by Thomas Web Solutions and powered by Navigator Platform