The Triad Flat Pack™ Power Transformer is designed to meet the needs of lower clearance PC board and solid state power designs. These units can also be used for control and instrumentation applications. Voltages and currents were chosen for widely used power applications. It is offered in a dual primary and dual secondary configuration.
Low Profile: Allows 3/4" card spacing for 2.5 VA units; Allows 1" card spacing for 6 VA units; Allows 1 1/4" card spacing for 12 VA units: Allows 1 1/2" card spacing for 24 VA and 48 VA units.
Low Profile: Allows 3/4" card spacing for 2.5 VA units; Allows 1" card spacing for 6 VA units; Allows 1 1/4" card spacing for 12 VA units: Allows 1 1/2" card spacing for 24 VA and 48 VA units.
Unit of Measure
Specifications
Electrical Rating |
N/A 12.0 V·A |
Voltage in Series |
N/A 40.0 V CT at 0.3 A |
Transformer Contact Type |
N/A Center Tap |
Voltage in Parallel |
N/A 20.0 V at 0.6 A |
Dimension (H) |
N/A 1.062 |
Dimension (W) |
N/A 2.000 |
Dimension (L) |
N/A 2.500 |
Dimension (A) |
N/A 2 |
Dimension (B) |
N/A 0.500 |
Dimension (C) |
N/A 0.500 |
Weight |
N/A 11.0 oz |
Mounting Width |
N/A 1.0 in |
Mounting Length |
N/A 2.0 in |
Primary Voltage |
N/A 115 V230 V |
Primary Frequency |
N/A 50 Hz60 Hz |
RMS Hi Pot Tested |
N/A 2,000 V |