The Triad Flat Pack™ Power Transformer is designed to meet the needs of lower clearance PC board and solid state power designs. These units can also be used for control and instrumentation applications. Voltages and currents were chosen for widely used power applications. It is offered in a dual primary and dual secondary configuration.

Low Profile: Allows 3/4" card spacing for 2.5 VA units; Allows 1" card spacing for 6 VA units; Allows 1 1/4" card spacing for 12 VA units: Allows 1 1/2" card spacing for 24 VA and 48 VA units.
Unit of Measure

Check Stock

Click here to check stock >>

N/A

Specifications

Electrical Rating

N/A 6.0 V·A

Voltage in Series

N/A 24.0 V CT at 0.25 A

Transformer Contact Type

N/A Center Tap

Voltage in Parallel

N/A 12.0 V at 0.5 A

Dimension (H)

N/A 0.875

Dimension (W)

N/A 1.562

Dimension (L)

N/A 1.875

Dimension (A)

N/A 1.600

Dimension (B)

N/A 0.375

Dimension (C)

N/A 0.375

Weight

N/A 7.0 oz

Mounting Width

N/A 0.88 in

Mounting Length

N/A 1.62 in

Primary Voltage

N/A 115 V230 V

Primary Frequency

N/A 50 Hz60 Hz

RMS Hi Pot Tested

N/A 2,000 V

Technical Notes

N/A

  1. Hi-pot tested at 2,000 VRMS.
  2. Split bobbin with side-by-side windings to reduce capacitance and eliminate the need for a static shield.
  3. Mounting Holes: 2.5 VA & 6VA = 0.125"; 12 VA = 0.165"; 24 VA = 0.157"; 48 VA = 0.20"