Highly dependable Triad common mode EMI suppression inductors are used in various types of power supplies to eliminate noise common to all lines. These units also provide effective differential mode filtering. Designed to meet most regulatory requirements, they minimize AC line transmitted interference often created by high frequency switching power supplies. Normally placed close to the input source, these compact inductors are constructed with UL rated 130 ºC materials.
Unit of Measure

Specifications

Min. Inductance

N/A 6.90 mH

RMS Current

N/A 4.400 A

Max. DC Resistance

N/A 0.077 Ohm

Min. Leakage

N/A 70.0 µH

Dimension (H)

N/A 1.18 in

Dimension (W)

N/A 1.26 in

Dimension (L)

N/A 1.50 in

Dimension (A)

N/A 0.150 in

Dimension (B)

N/A 0.600 in

Dimension (C)

N/A 0.200 in

Dimension (D)

N/A 0.036 in²

Weight

N/A 0.54 lb

Industry Standards

N/A CSA IEC UL VDE

Technical Notes

N/A

  1. Hi-pot tested at 2500 VRMS.
  2. DC resistance at 20 ºC ±10%.
  3. Inductances are minimum measured at 10 Gauss.
  4. Current rating for approximately 40 ºC temperature rise.

Note

N/A A CME375-KIT is available which includes each one of the components in section A.

Catalog Index     Privacy     Sitemap© 2017 Triad Magnetics, All Rights Reserved   |   Site created by Thomas Web Solutions and powered by Navigator Platform